Wreck diving is often associated with recreational diving and exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. For more information on wreck diving, please read the following. These are some important tips to get you started in wreck diving. First, get your equipment ready! There are several different types of equipment. Getting the right kind of gear can make the difference between a fun and dangerous dive.
Non-penetration wreck diving
If you are new to scuba diving and would like to try non-penetration wreck diving, then there are a few things you need to know. First, wrecks often provide a great place to fish. Divers should be aware that lines and fishing nets may be in the area. They may also find themselves in dangerous terrain with sharp edges. Additionally, currents can push them away from the places they want. This type of terrain is dangerous and it's best to avoid wreck diving.
It may sound simpler, but technical penetration diving can pose a lot of dangers. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. Furthermore, the presence of silt and mud in some wrecks can severely compromise visibility and make orientation very difficult. To avoid these dangers, non penetration wreck diving requires that divers stay within the visible zone and make a move towards an exit point.
A sunken wreck is surveyed
In addition to traditional surveys, surveying a sunken wreck requires specific equipment and a thorough understanding of the maritime history of the area. Depending on the time and accuracy required, the survey method may be a combination of a GPS position fix, a tape baseline, or offset and ties measurements. Several techniques are available for surveying a sunken wreck, including sonar and other non-destructive methods.
A shipwreck inspection is intended to locate and identify the ship. It should also identify navigational hazards, environmental conditions, and historical events. The survey report should include a summary of the vessel's structural features, the incident that sank it, and any prior archeological surveys. The site should be able to be plotted on an nautical chart to allow for precise measurements.
Equipment needed
It is important to know the details of a shipwreck before diving. Be familiar with its layout, key features, and hazards. These details will assist you in preparing for your dive. Below you'll find the information you need to dive in a shipwreck. Before you dive, be sure to go through the checklist.
Proper buoyancy control can prevent you from losing your way in dark waters. For wreck diving, you need to have good buoyancy control. It's not recommended to dive in deep water without a buoyancy control tank and a weight belt. For fun diving, you will need a weight belt as well as a scuba regulator. These two pieces are essential for your safety and the safety of all others.